For screen reader problems with this website, please call712-252-45077 1 2 2 5 2 4 5 0 7Standard carrier rates apply to texts.
The S-Series subwoofers are designed with increased bass output and installation versatilityRead More
Max RMS Power Capacity: 300W RMS Peak Power Capacity: 900W Peak Power
8” 4O+4O Subwoofer
Power Handling: 300W – 900W
High Strength Custom Steel Frame
Great complement to V-Power Amplifiers
Frequency Response: 34Hz-200Hz
Mounting Depth 3-3/4”
Recommended Sealed Box: 0.30 cubic foot (gross volume)
Recommended Vented Box: 0.71 cubic foot (gross volume), 7” x 0.75” vent area, 15.5” vent length
Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic foot. It is perfect for under seats, behind rear bench seats in trucks, or even in some door applications.
The 8” S-Series subwoofers are engineered with an improved voice coil allowing the woofer to benefit from it's power rating of 300 watts. Match them with the powerful VPower MRV-M500 mono amplifier for a great subwoofer system.
Each S-Series subwoofer uses a custom-stamped steel frame. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents as well as a vented back plate to help cool the subwoofer voice coil and motor parts, plus a shallow design to help fit in smaller spaces.
The push-type insert terminals help reduce the installation time of the S-Series subwoofers. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal.
The S-Series subwoofers use two strontium ferrite magnets stacked together, for increased motor strength and excursion which ultimately leads to more bass output.
The S-Series subwoofers have concealed mount gaskets, creating a clean, finished appearance for any vehicle.
All S-Series subwoofers are compatible with optional grilles (Sold Separately) to provide added protection to the cone. The grilles feature a mesh design with a S-Series logo badge. Choose from the following to match the size of your subwoofer; all grilles are sold as single pieces
-KTE-8G: For 8" S-Series Subwoofers
-KTE-10G.2: For 10" S-Series Subwoofers
-KTE-12G.2: For 12" S-Series Subwoofers
General Specs | |
| Woofer Size | 8" |
| Mount Depth | 3.75 |
| RMS Power Handling (Watts) | 300 |
| Peak Power Rating (Watts) | 900 |
| Subwoofer Size | Up to 8" |
| Shallow Mount | No |
Proposition 65 Warning for California Residents