Networks

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

<avb-promotions data-type="custom" data-banner-id="11750"></avb-promotions>

Default Header After Global Promotions

If you are installing a network switch for POE cameras, IC Realtime’s new PWR-POE-8-V3 is, without a doubt, one of the best network camera integration solutions we have ever offered. This POE switch has the features and capacity to make it any camera inte

IC Realtime® Black 8 Port PoE Switch

Don’t let PWR-POE-8-V3’s compact 7.5” x 4” x 1.25” size fool you. With a total of 96 watts of POE power, it can power up to 8 cameras and drive POE power over 800 feet to reach remote camera locations. The red highlighted Port 1 can even provide up to 90 watts of High POE (802.3bt) for a power-hungry PTZ camera.

We all know POE cameras can freeze up or drop out from power blips or other random reasons, resulting in unhappy users or a service call for a simple camera reset/reboot. PWR-POE-8-V3 reduces or eliminates this annoying issue with 2 features that will both intelligently monitor attached cameras & adjust for power fluctuations to prevent camera power issues, and automatically attempt to reboot any unresponsive cameras.

Avoiding data stream choke points between IP cameras & the NVR means smoother streaming and the capacity to dependably use greater resolution cameras with higher streaming rates. While the 8 10/100 Mbps (PoE) camera ports can assure solid camera-to-switch rates, to speed the rest of the route to the network & back to the NVR, the new PWR-POE-8-V3 has dual 10/100/1000 Mbps uplink ports to double thruput. Both ports can also be set by DIP switch to an extended mode for greater range (but at a lower speed) when needed.

Is IC Realtime’s new PWR-POE-8-V3 just another 8 port POE switch? Far from it. This switch is optimized for IP cameras. In fact, PWR-POE-8-V3’s power & camera management features alone could justify upgrading working 8 port POE switches to a new PWR-POE-8-V3 on a distant or power problem-prone installation.

With PWR-POE-8-V3’s professional power capabilities, camera management skills, and video streaming capacity for even the most demanding installations, camera professionals would be pressed to find a better camera POE switch anywhere.

If you are installing a network switch for POE cameras, IC Realtime’s new PWR-POE-8-V3 is, without a doubt, one of the best network camera integration solutions we have ever offered. This POE switch has the features and capacity to make it any camera integrator’s first choice where a remote POE switch is required.

The PWR-EPOE-16-V2 is a 16-port ethernet switch, which supports up to 2600+feet (800 meters) long distance ePoE transmission using ePoE rated cameras (ePOE supported on ports 1-8). The switch can transmit at the speed of 10Mbps, or 300 meters at the speed

IC Realtime® Black 16 Port PoE Switch

Camera installation pros know a strong POE switch can make all the difference in camera to recorder performance & reliability. That’s why IC Realtime’s new PWR-EPOE-16-V2 Layer-two web-managed ePoE switch is such a big deal for camera integrators. It goes above & beyond the call with 8-pin simultaneous CCAT5/6 data & power transmission, two 60W HI-POE ports for high-draw cameras, full POE management & control, and even full ePOE compatibility.

Wiring Freedom For New And Upgrading Systems

ePOE can only be described as a gift to installers tasked with upgrading or replacing existing camera systems. PWR-EPOE-16-V2 not only provides a high switch supply voltage of 53VDC to ensure excellent overall CAT5/6 long-distance performance, it also supports ePOE and Power Over Coax technology. This allows using both coax cable and even twisted-pair for network camera & NVRS using our IVB-E102C and IVB-E202 baluns to reduce new wire pulls and simplify installations.

PWR-EPOE-16-V2 is capable of extended transmission range - up to 2600+ feet of data and power transmission - over 8x the distance of a standard IP switch. Where our original PWR-EPOE-16 was strong, version 2 is even stronger. The -V2 version adds upgraded POE management features while keeping the original’s IT manager pleasing control & tracking skills. With PWR-EPOE-16-V2, POE power stays on during a soft switch reset (including a web reboot, import configuration, or FW upgrade) so camera power never falters. PD Alive monitors switch PD status performance in real-time monitoring to keep it alive, and you can even schedule power to turn on/off on selected ports to save energy.

PWR-EPOE-16-V2 can deliver up to 60W of HI-PoE power (IEEE802.3bt) on ports 1-2. These “orange ports” dish out up to 60W for power-hungry cameras like PTZs and multi-head & panoramic cameras and up to 30W on ports 3-16.  Intelligent POE delivers priority power supply for ports with smaller port numbers to keep your most essential cameras live. PWR-EPOE-16-V2 is a layer-two web-managed network switch is backward compatible with standard PoE, it has a massive Power Over Ethernet budget of 240 watts, and both static discharge and lightning protection are built in.

IP POE camera systems need dependable POE power & constant streaming, and that’s precisely what PWR-EPOE-16-V2 is built to provide.  When you add in its remote & automated switch management capabilities, it’s easy to see why any camera integrator would choose IC Realtime’s PWR-EPOE-16-V2 as their default camera POE switch choice.

The PWR-EPOE-16-V2 is a 16-port ethernet switch, which supports up to 2600+feet (800 meters) long distance ePoE transmission using ePoE rated cameras (ePOE supported on ports 1-8). The switch can transmit at the speed of 10Mbps, or 300 meters at the speed of 100Mbps over Cat5/6.

The M2M-POE-4 60W is an unmanaged 6-Port Power over Ethernet Switch with a total of 60 watts of PoE+ power. All ports run at 10/100Mbps and can provide up to 30W per port through the IEEE 802.3at standard, as well as up to 60W on port 1 through Hi-PoE.

IC Realtime® Black 4 Port PoE Switch

It has two Ethernet uplink ports to allow for communication without sacrificing any PoE ports. It also features an extend switch to allow for PoE transmission of up to 820ft (which reduces data transmission to 10Mbps).

2 Ethernet uplink ports At 10/100Mbps each

60W max power, Hi-PoE up to 60W on port 1, up to 30W on all other ports

Compact metal enclosure with up to 820ft (250m) PoE transmission

PoE support: 1x Hi-PoE camera or 2x PoE+ cameras or 4x PoE cameras

Networks

IC Realtime® Black 4 Port PoE Switch

$336.00

IC Realtime® Black 8 Port PoE Switch

$462.00

IC Realtime® Black 16 Port PoE Switch

$1,150.00

Is it Time to Plan Your Next Great Project? Great projects start with great plans! Let our team of experts find the right solutions to meet all your needs, for projects from residential to commercial. Send us your details below, and one of our friendly and knowledgeable professionals will reach out.

SHOP

SOLUTIONS

About

STORE INFO

Connect with Us